G Series high efficiency thread compressed air filter for air compressor
G Series high efficiency thread compressed air filter for air compressor
G Series high efficiency thread compressed air filter for air compressor
Price
US $30
Model
G0300
MOQ
1 piece

Item specifics

Flow Rate
0.55 to 49m3/min
Max Pressure
16barg
Connection
1/2 to 4''
Particulate removal down to
3.0/ 1.0 / 0.01micro
Oil removal down to
0.1 / 0.01 / 0.003ppm
Drain
inner automatic drain
Optional Accessories
Differential pressure gauge

Review

Description

G Series high efficiency thread compressed air filter for air compressor 
The new solution in Compressed air filtration
Compressed air contains harmful solid, liquid and vaporous contaminants that can damage pneumatic equipment, control and instruments. Removal of these contaminants is necessary to sustain equipment life and continue efficient production operation. Rust, scale and decay within compressed air system piping, and ambient air that contains gaseous and corrosive substances are common factor that contribute to the damaging effect of compressed air. 

Compressed air purification equipment must deliver high quality air with the lowest cost of operation. 

Very Low pressure drop means Energy Efficient
Inner automatic drain,differential pressure gauge
Inner threaded installation,easy to replace the element.
Pleated element, low pressure drop ,large filtration area.
Stainless steel and aluminum alloy hosing features high cooling effect.
Suitable for all compressed air application and all compressor type
Suitable for mineral and synthetic oil and oil free application
Silicon free ,safe for painting and surface coating applications
Electrophoresis treatment eliminating corrosion on internal and external head and bowl surfaces.

Scala elements are manufactured for lowest pressure drop and in accordance with International Standard for compressed air quality ISO8573.1:2001
SCALA'S filter element has the following advantages 
Deep-pleated Filter Element

Pleated filter elements provides a greater filtration volume than non-pleated.  The large surface area and the low velocity, increase the space for holding contaminants,which reduce the differential pressure cased by retention of solid particles. The service life increase with a result of lower running cost. 


Adopted with stainless steel diamond mesh which has larger filtration area and less pressure resistance compared to circular hole mesh.

Adopted with heat and corrosion resistant polyester wadding instead of traditional form. Form tears under high operational temperature causing the broken pieces to be carried over down stream.

No Pull rod design, saving installation space and very easy to change the element.

Elbow piping from air inlet to element which has smaller pressure drop compared to right angle piping.

Filtration Grade
Oil Removal 
Particulate Removal
 Initial   Pressure 
Drop
Max.Inlet Temperature 
Grade P
N/A
3μm
0.05bar
100℃
Grade M
0.1ppm
1μm
0.08bar
100℃
Grade H
0.01ppm
0.01μm
0.1bar
100℃
Grade C
0.003ppm
N/A
0.07bar
60℃
Technical Specifications
Filter Model
Connection
Flow Capacity
Element Model
Dimensions(mm)
Weight
BSP
Nm3/min
cfm
A
B
C
D
Kg
G0055*
1/2''
0.55
19
0055E*
100
214
181
95
0.8
G0056*
3/4''
0.55
19
0055E*
100
214
181
95
0.8
G0120*
1/2''
1.2
42
0120E*
100
214
181
110
0.9
G0121*
3/4''
1.2
42
0120E*
100
214
181
110
0.9
G0200*
3/4''
2
71
0200E*
100
275
242
145
1.5
G0300*
3/4''
3
106
0300E*
100
275
242
175
1.6
G0350*
1''
3.5
124
0350E*
130
320
273
185
2.3
G0351*
1.1/2''
3.5
124
0350E*
130
320
273
185
2.3
G0500*
1''
5
177
0500E*
130
320
273
185
2.4
G0501*
1.1/2''
5
177
0500E*
130
320
273
185
2.4
G0750*
1.1/2''
7.5
265
0750E*
130
402
355
230
2.6
G1050*
1.1/2''
10.5
371
1050E*
130
402
355
270
2.7
G1450*
2''
14.5
512
1450E*
180
527
465
390
6.5
G1451*
2.1/2''
14.5
512
1450E*
180
527
465
390
6.5
G2200*
2''
22
777
2200E*
180
707
645
570
8.5
G2201*
2.1/2''
22
777
2200E*
180
707
645
570
8.5
G2500*
2.1/2''
25
883
2500E*
225
857
779
570
15
G2501*
3''
25
883
2500E*
225
857
779
570
15
G3000*
2.1/2''
30
1059
3000E*
225
857
779
630
15.2
G3001*
3''
30
1059
3000E*
225
857
779
630
15.2
G3002*
4''
30
1059
3000E*
225
857
779
630
15.2
G3500*
3''
35
1236
3500E*
225
1007
929
700
18
G3501*
4''
35
1236
3500E*
225
1007
929
700
18
G4500*
3''
45
1589
4500E*
225
1007
929
700
18.2
G4501*
4''
45
1589
4500E*
225
1007
929
700
18.2
G4900*
4''
49
1730
4900E*
225
1007
929
700
18.5
Note: 
* Standards for filtration grades
* Max.working pressure 16barg (232psig)