G Series high efficiency Flange type compressed air filter for air dryer
G Series high efficiency Flange type compressed air filter for air dryer
G Series high efficiency Flange type compressed air filter for air dryer
Model
G3000*

Item specifics

Flow Rate
1280CFM( 36.3m3/min)
Max Pressure
16bar
Connection
3''NPT or BSP
Filtration grade
P
Particulate removal down to
3 micro
Oil removal down to
n/a
Optional
inner automatic drain
Optional Accessories
Differential pressure gauge

Review

Description

G Series high efficiency Flange type compressed air filter for air dryer
Compressed air contains harmful solid, liquid and vaporous contaminants that can damage pneumatic equipment, control and instruments. Removal of these contaminants is necessary to sustain equipment life and continue efficient production operation. Rust, scale and decay within compressed air system piping, and ambient air that contains gaseous and corrosive substances are common factor that contribute to the damaging effect of compressed air. 

Compressed air filters must deliver high quality air with the lowest cost of operation. 
Very Low pressure drop means Energy Efficient
Inner automatic drain,differential pressure gauge
Inner threaded installation,easy to replace the element.
Pleated element, low pressure drop ,large filtration area.
Stainless steel and aluminum alloy hosing features high cooling effect.
Suitable for all compressed air application and all compressor type
Suitable for mineral and synthetic oil and oil free application
Silicon free ,safe for painting and surface coating applications
Electrophoresis treatment eliminating corrosion on internal and external head and bowl surfaces.
Scala elements are manufactured for lowest pressure drop and in accordance with International Standard for compressed air quality ISO 8573.1:2001
Scala Filter Element

Pleated filter elements provides a greater filtration volume than non-pleated.  The large surface area and the low velocity, increase the space for holding contaminants,which reduce the differential pressure cased by retention of solid particles. The service life increase with a result of lower running cost. 


Adopted with stainless steel diamond mesh which has larger filtration area and less pressure resistance compared to circular hole mesh.

Adopted with heat and corrosion resistant polyester wadding instead of traditional form. Form tears under high operational temperature causing the broken pieces to be carried over down stream.

No Pull rod design, saving installation space and very easy to change the element.

Elbow piping from air inlet to element which has smaller pressure drop compared to right angle piping.
Filtration Grade
Oil Removal 
Particulate Removal
Initial Pressure Drop
Max. Inlet Temperature
Grade P
N/A
3μm
0.05bar
100℃
Grade M
0.1ppm
1μm
0.08bar
100℃
Grade H
0.01ppm
0.01μm
0.1bar
100℃
Grade C
0.003ppm
N/A
0.07bar
60℃
Technical Specifications
Filter Model
Connection
Flow Capacity
Element Model 
Dimensions(mm)
Weight
DN
Nm3/min
cfm
A
B
C
D
Kg
GL2201*
DN65
22
777
2200E*
310
707
645
570
16.5
GL2500*
DN65
25
883
2500E*
360
857
779
570
23
GL2501*
DN80
25
883
2500E*
360
857
779
630
23.4
GL3000*
DN65
30
1059
3000E*
360
857
779
630
23.2
GL3001*
DN80
30
1059
3000E*
360
857
779
630
23.6
GL3002*
DN100
30
1059
3500E*
360
857
779
630
27.2
GL3500*
DN80
35
1236
3500E*
360
1007
929
700
27.4
GL4500*
DN100
45
1589
4500E*
360
1007
929
700
31.2
GL4900*
DN100
49
1730
4900E*
360
1007
929
700
31.5